Tel: (480) 219-9007

Miniature Cartridge Four Point Probe Head

JANDEL ENGINEERING LTD. manufactures the miniature cartridge probe to be compatible with Kokusai probing equipment. It is 0.9″ x 1.1″ high (23.6mm x 28mm high) and weighs 28g. There is a positioning key and a retaining screw for either 4BA or M3.

Miniature Cartridge Four Point Probe Head with 6-32 Tapped Holes

JANDEL ENGINEERING LTD. manufactures the miniature cartridge probe with 6-32 tapped holes to be compatible with Signatone, Magnetron, AIT, and Chang Min Tech probing equipment.

High/Low Temp Macor/Glass Four Point Probe Head

JANDEL ENGINEERING LTD. manufactures a high / low temperature four-point probe constructed of Macor Glass-Ceramic with ceramic fiber leads. This probe is suitable for use at cryogenic temperatures (submerged in liquid nitrogen) or in a high temperature environmental chamber at temperatures up to 300 degrees centigrade.

Jandel Hi-Vac Cylindrical Four Point Probe Head

The JANDEL ENGINEERING LTD. Cylindrical four point probe is available in a special version for use in a high Vacuum environment. The Hi-Vac version of the Jandel cylindrical probe head has been successfully used in vacuum that was at 1 x 10^-10m bar. The application was described in the “Journal of Physics: Condens. Matter 3 […]

FIVE Point Probe Heads

The five-point probes are displayed to demonstrate Jandel’s ability to manufacture this type of custom probe. Jandel manufactures each of these probes to a particular customer’s requirements and is not offering these probes as part of specific application solutions.

Close Needle Spacing Probes

Jandel offers probes with close needle spacing (0.5 mm) in several models including the Cylindrical Probe, Six-Way Probe, Four-Pin Probe, and Cartridge with Lead. Probes built with 0.5mm tip spacing are available with spring loads of up to 100 grams.