The Jandel ResTest Test Unit with SRM Probe Head can accurately measure silicon tops and tails, potscrap, ingots, and homogeneous silicon wafers.
About the Jandel ResTest Four Point Probe
- Constant current source and meter for use in making the four point probe measurement.
- Measurement range: 10 milliohms-ohms-per-square to 10^6 ohms-per-square
- Displays either sheet resistance or volume resistivity.
- Save data using:
- PC connection
- Up to 99 measurements can be stored internally, or
- USB memory stick
- Accommodates either linear or square array probes and 6 choices of probe tip spacings
- Supports four measurements types:
- Sheet Resistance – Primary measurement value is display in Ohms/Square
- Wafer Resistivity – Primary measurement value is display in Ohms/Cm
- Volume Resistivity – Primary measurement value is display in Ohms/Cm
- Ohms Resistance – Primary measurement value is display in Ohm
- Three available current ranges:
- 0.5mA to 10mA
- 10uA to 100uA
- 1uA to 10uA
- Includes PC interface software
- Interfaces with Jandel four point probing units
Multiposition Wafer Probe
About the SRM Probe
The SRM probe is a lower cost plastic bodied probe that is suitable for use in measuring a wide range of materials including various conductive coatings, ITO on glass, silicon wafers, ingots, potscrap, conductive paints, and various thin films. The connection to the probe head is made via a female RJ45 connector which is the same type of connector used for Ethernet connections.
Holding a probe head by hand does not always work well when measuring higher re-sistance materials and films, however, for many materials it is suitable.
 |
 |
 |
The SRM probe heads are available in three choices of tip spacing, three choices of spring load, two choices of tip material, and three choices of tip radii.
ResTest Four Point Probe Measurement Unit
The ResTest is a combined constant current source and digital voltmeter, which has been designed specifically for use with a four point probe to produce resistivity and sheet resistance measurements. The unit supplies a constant current and can display resultant voltage sheet resistance and volume resistivity.
The ResTest has a large color display and it can read-out in either sheet resistance in the range from 10 milliohms-per-square up to 106 (1 million) ohms-per-square. The range is not as great as the RM3000, however, it is faster and has a larger color display.
Downloads
 |
Product Brochure for the SRM Probe Head |
 |
ResTest User Instruction Manual |
|
ResTest Product Brochure |
We Recommend
If you do not require as great a measurement range as the ResTest Test Unit provides, you might be interested in the: SRM Probe Head combined with HM21 Hand Held Meter.
SRM Probe Head combined with RM3000 Test Unit features high accuracy, an excellent range, and many features which simplify the four point probing measurement: SRM Probe Head combined with RM3000 Test Unit
Four-Point-Probes is a division of Bridge Technology. To request further information please call Bridge Technology at (480) 219-9007 or send e-mail to Joshua Bridge at: sales@bridgetec.com
