Jandel 4-Pin Four Point Probe Head

4-Pin Four Point Probe Head

JANDEL ENGINEERING LTD. manufactures the 4-pin probe to be compatible with Napson Corporation equipment.. It has a 1″ diameter body and is 1.6″ high (25.4mm x 40.5mm high). The probe weighs 50g.

Jandel four point probe heads are built with upper and lower jewel bearings and are built to 1% mechanical accuracy. Final testing involves the use of calibrated measurement instruments (electronic force gauge, video inspection system, interferometer) to verify tip radii, tip spacing, spring load, and tip planerity.

Downloads

Product brochure regarding the Four Pin Probe for use with Napson systems (36K PDF file)

Four-Point-Probes is a division of Bridge Technology. To request further information please call Bridge Technology at (480) 219-9007 or send e-mail to Joshua Bridge at: sales@bridgetec.com

Jandel Engineering Four Point Probe Systems
	1. Multiposition Wafer Probe with RM3000+ Test Unit
	2. Multiposition Wafer Probe with ResTest Meter
	3. Multiposition Wafer Probe with HM21 Hand Held Meter
	4. Multi Height Probe + RM3000+ Four Point Probe Test Unit
	5. Multi Height Probe with ResTest Meter
	6. Multi Height Probe with HM21 Hand Held Meter
	7. Multi Height Microposition Probe with RM3000+ Test Unit
	8. Multi Height Microposition Probe with ResTest Meter
	9. Universal Probe with RM3000+ Test Unit
	10. Universal Probe with ResTest Meter
	11. Hand Applied Probe with RM3000+ Test Unit
	12. Hand Applied Probe with ResTest Meter
	13. Hand Applied Probe with HM21 Hand Held Meter Portable System
	14. CYL-RM3000+ Four Point Probe System
	15. Cylindrical Probe Head with ResTest Meter
	16. CYL-HM21 Four Point Probe
	17. SRM Probe Head with RM3000+ Test Unit
	18. SRM Probe Head with ResTest Meter
	19. SRM Probe Head with HM21-SRM Hand Held Meter for Bulk Resistivity Measurements
	20. SRM Probe Head with HM21-SRM Hand Held Meter for General Purpose Use
Jandel Engineering System Accessories
	21. Jandel Light Shrouds
	22. Reference Sample
	23. Cylindrical Probe Head
SRM-232 Four Point Probes
	25. SRM-232 Four Point Probe
	26. SRM Probe Head Information (PDF file)
	27. SRM-232 Calibration Fixture Information (PDF file)
Ecopia Hall Effect Measurement Systems
	28. Ecopia HMS-3000 Hall Measurement System
	29. Ecopia HMS-5000 Variable Temperature Hall Effect Measurement System
	30. Ecopia HMS-7000 Photonic Hall Effect Measurement System
Four Point Probe Individual Components, Measurement Electronics and Probe Units
	31. RM3000+ Test Unit
	32. ResTest Meter
	33. HM21 Hand Held Meter
	34. Multiposition Wafer Probe
	35. Multi Height Probe
	36. Microposition Probe
	37. Multi Height Microposition Probe
	38. Universal Four-Point Probe
	39. Hand-Applied Four-Point Probe
	40. SRM Probe Head
Four Point Probe Heads For All Known Systems
	41. All Four Point Probe Heads
	42. Probes for Prometrix, KLA/Tencor, & CDE
	43. Cylindrical Probe Head
	44. Four Pin Probe Head
	45. Cartridge with Lead Probe Head
	46. Compact Probe Head
	47. Miniature Cartridge Probe Head
	48. Miniature Cartridge with 6-32 Tapped Holes Probe Head
	49. High / Low Temperature Four Point Probe Head
	50. Vacuum Chamber Four Point Probe Head
	51. Unusual FIVE Point Probes
	52. Close Needle Spacing Probes

4-Pin Four Point Probe Head

Downloads

All Products